Vendor Specific Data Register 0 @0x40c

This contains the Bytes 4, 5, 6, 7 of Vendor-Specific Register space. In the implementation, these four Bytes of Vendor Specific Registers are called as Vendor Specific Data Register 0 and is described below.

Table 1. i_vendor_specific_data_reg0

Bits	SW	Name	Description	Reset
31:0	R/W	General- Purpose Data [GPD]	These bits are implemented as register bits that can be read and written by the host through a Config transaction, or via the local management interface. Their use is application-dependent.	0x0