Dynamic Power Allocation Array Register 1 @0x1d4

This is a register in an array of two registers that contain the power allocations for the DPA substates. Each location contains power allocation values for four substates, 8 bits per substate. The value in each 8-bit field, when multiplied by the Power Allocation Scale programmed in the DPA Capability Register, provides the power associated with the corresponding substate in Watts.

Table 1. i_DPA_power_alloc_reg1
Bits SW Name Description Reset
7:0 R Substate Power Allocation 4 [SPA0_1] This field contains the power allocation for the DPA substate #4 covered by this register. This value, when multiplied by the Power Allocation Scale programmed in the DPA Capability Register, provides the power associated with the corresponding substate in Watts. 8'h4
15:8 R Substate Power Allocation 5 [SPA1_1] This field contains the power allocation for the DPA substate #5 covered by this register. This value, when multiplied by the Power Allocation Scale programmed in the DPA Capability Register, provides the power associated with the corresponding substate in Watts. 8'h5
23:16 R Substate Power Allocation 6 [SPA2_1] This field contains the power allocation for the DPA substate #6 covered by this register. This value, when multiplied by the Power Allocation Scale programmed in the DPA Capability Register, provides the power associated with the corresponding substate in Watts. 8'h6
31:24 R Substate Power Allocation 7 [SPA3_1] This field contains the power allocation for the DPA substate #7 covered by this register. This value, when multiplied by the Power Allocation Scale programmed in the DPA Capability Register, provides the power associated with the corresponding substate in Watts. 8'h7