Shadow Register UR Error @0x114

Shadow register to create UR error via local f/w. Please make sure this register is written to last, after writing to all the header log and function number registers. A write to this register with any bits set, will internally create a single cycle pulse with the corresponding error type and the header log will reflect the value written in the shadow header log registers.

Table 1. i_shdw_ur_err_reg

Bits	SW	Name	Description	Reset
0	W	Posted UR Error[P_UR_ERR]	If this bit is set, the corresponding posted UR error bits will be set in the AER and device status registers of the target function.	0x0
1	W	Non Posted Error [NP_UR_ERR]	If this bit is set, the corresponding non-posted UR error bits will be set in the AER and device status registers of the target function.	0x0
31:2	R	Reserved [R0]	Reserved	0x0