Negotiated Lane Map Register @0x200

This register contains a map of the active lanes used by the Controller to form the link during link training. It also contains a bit to indicate whether the Controller reversed the lane number on its lanes during link training.

Table 1. i_negotiated_lane_map_reg
Bits SW Name Description Reset
3:0 R Negotiated Lane Map [NLM] Bit i of this field is set to 1 at the end of link training if Lane i is part of the PCIe link. The value of this field is valid only when the link is in L0 or L0s states. 0x0
15:4 R Reserved [R70] Reserved 0x0
16 R Lane Reversal Status [LRS] This bit set by the Controller at the end of link training if the LTSSM had to reverse the lane numbers to form the link. 0x0
31:17 R Reserved [R71] Reserved 0x0