Physical Function Configuration Register @0x2c0

This register contains the enable bits for all the Functions implemented by the Controller. Resetting the enable bit of a Function disables the Function from responding to configuration requests.

Table 1. i_pf_config_reg

Bits	SW	Name	Description	Reset
0	R	Function 0 Enable [F0E]	Enable for Function 0. This bit is hardwired to 1.	0x01
1	R/W	Function 1 Enable [F1E]	Enable for Function 1. This bit can be modified from the local management bus.	0x01
2	R/W	Function 2 Enable [F2E]	Enable for Function 2. This bit can be modified from the local management bus.	0x01
3	R/W	Function 3 Enable [F3E]	Enable for Function 3. This bit can be modified from the local management bus.	0x01
31:4	R	Reserved [R]	Reserved	0x0