GPIO Input Properties

You can change these properties for GPIO and buses.

You cannot change these properties for bus members.

Table 1. GPIO Input Properties
API Name GUI Name Trion Titanium Topaz Values
DLY_ENA_PIN Enable Pin Name Pin name
DLY_RST_PIN Reset Pin Name Pin name
DLY_INC_PIN Control Pin Name Pin name
IN_PIN Input Pin Name Pin name
IN_HI_PIN Input Pin Name (HI) Pin name
IN_LO_PIN Input Pin Name (LO) Pin name
IS_INCLK_INVERTED Input Clock Inverted 0, 1
IN_CLK_PIN Input Clock Pin Name Pin name
IN_REG Not applicable BYPASS, REG, DDIO, DDIO_RESYNC
BYPASS, REG, DDIO, DDIO_RESYNC, DDIO_RESYNC_PIPE, SERIAL
INDELAY Static Delay Setting 0 - 63
INDELAY_DYN_MODE Enable Dynamic Delay 0, 1
INFASTCLK_PIN Serial Clock Pin Name Pin name
PULL_UP_ENA_PIN Dynamic Pull Up Enable Pin Name Pin name
GBUF_PIN Global Pin Name Pin name