Using the IP Configuration Wizard

The following steps explain how to customize an IP core with the IP Configuration wizard.
  1. Open the IP Catalog.
  2. Choose an IP core and click Next. The IP Configuration wizard opens.
  3. Enter the module name in the Module Name box.
    Note: You cannot generate the core without a module name.
  4. Customize the IP core using the options shown in the wizard. For detailed information on the options, refer to the IP core's user guide or on-line help.
  5. (Optional) In the Deliverables tab, specify whether to generate an IP core example design targeting an Efinix® development board and/or testbench. For SoCs, you can also optionally generate embedded software example code. These options are turned on by default.
  6. (Optional) In the Summary tab, review your selections.
  7. Click Generate to generate the IP core and other selected deliverables.
  8. In the Review configuration generation dialog box, click Generate. The Console in the Summary tab shows the generation status.
    Note: You can disable the Review configuration generation dialog box by turning off the Show Confirmation Box option in the wizard.
  9. When generation finishes, the wizard displays the Generation Success dialog box. Click OK to close the wizard.

The wizard adds the IP to your project and displays it under IP in the Project pane.