Program Multiple Images (Bitstream and Data)

About this task

In this programming mode, you specify one bitstream and one or more data files to combine into a single file for programming. You can only use active mode.

Procedure

  1. Click the Combine Multiple Images button.
  2. Choose Mode > Generic Image Combination.
  3. Enter the output file name.
  4. Choose the output file location. The default is the project's outflow directory.
  5. Click Add Image.
  6. Select the image file to place in that location.
  7. Click Open. The image file and flash length are displayed in the table.
  8. Specify the flash address.
  9. Repeat steps 5 through 8 as needed.
    Note: If you want to combine a bitstream and a RISC-V binary, use 0x00000000 as the bitstream's flash address and 0x00380000 as the binary's flash address.
  10. Click Apply to generate the combined image file.
  11. Click Close to return to the Programmer, which displays the combined image file as the image to use for programming.
  12. Click Start Program.

Results