PMA Direct Pins Tab

This tab has several sub-tabs for defining the PMA Direct interface pins.

Table 1. Pins Tab: Clock and Reset Sub-Tab Settings

Parameter	Choices	Notes
Interface Transmit Clock Pin Name	User defined	Specify the clock name.
Transmit Clock Input Connection Type	gclk, rclk	Default: rclk. Choose whether to use a global clock (gclk) or regional clock (rclk).
Interface Receive Clock Pin Name	User defined	Specify the clock name.
Receive Clock Input Connection Type	gclk, rclk	Default: rclk. Choose whether to use a global clock (gclk) or regional clock (rclk).
PCS Receive Reset Pin Name	User defined	Specify the pin names. Efinix recommends using the default names.
PCS Transmit Reset Pin Name
PHY Lane Reset Pin Name

Table 2. Pins Tab: Control Sub-Tab

Parameter	Selection	Notes
PMA Transmit Electrical Idle Pin Name	User defined	Efinix recommends using the default name.

Table 3. Pins Tab: Data Interface Sub-Tab

Parameter	Selection	Notes
Receive Data [63:0] Bus Name	User defined	Efinix recommends using the default name.
Transmit Data [63:0] Bus Name	User defined	Efinix recommends using the default name.

Table 4. Pins Tab: Error And Status Sub-Tab Settings

Parameter	Selection	Notes
PHY Interrupt Pin Name	User defined	Define the pin name for the error and status signal. Efinix recommends using the default name.

Table 5. Pins Tab: Power Up Sub-Tab Settings

Parameter	Selection	Notes
All	User defined	Define the pin names for the signals used when the interface powers up. Efinix recommends using the default names.