PCI Express RP Outbound Tab

In the RP Outbound tab you configure the root port. If you have not yet configured anything, this tab only shows the Root Port Outbound Settings button. Click it to open the Root Port Outbound Settings dialog box where you create and configure regions. After you have configured one or more regions, the RP Outbound tab shows a summary of the region settings.

You can enter cofigurations for up to 32 regions in the Root Port Outbound Settings dialog box. Click the Verify button to perform a design check. If the software finds any configuration errors, it highlights them in the Console. Refer to Design Check: PCI Express Messages for a description of the error messages. When you finish configuration, the software saves it into the specified .json file in your project directory.

Figure 1. Root Port Outbound Settings Dialog Box

Table 1. Region Configuration Settings
Parameter	Choices	Notes
Outbound Acccess Region	0 - 31	Select the region number.
TLP Type	Type 0 Configuration Type 1 Configuration	Type 0 is for endpoints. Type 1 is for switches, bridges, or downstream ports.
Outbound AXI Region Base Address {63:8]	User defined	Default: 0x0
ID-Based Ordering	On, off	Default: off
Relaxed Ordering	On, off	Default: off
No Snoop	On, off	Default: off
Traffic Class	User defined	Default: 0x0
Force ECRC Insertion	On, off	Default: off
Completer ID	Static Dynamic through AXI ports pcie_master_AW/RADI	Default: Static If you choose a dynamic ID, you need to specify the Bus, Device, and Function options.
Bus	0 - 255	Choose the bus number.
Device	0 - 31	Choose the device number.
Function	0 - 7	Choose the function number.