rtcDemo
This example (rtcDemo directory) shows how to use the on-board PCF8523 RTC module on the Ti375C529 FPGA. The demo allows the user to change various configurations such as real-time data with a convertible 12/24hr time system, alarm, and battery setting of the PCF8523 module when the main menu feature is enabled, else it will print the real-time data every few seconds.
Welcome to RTC Demo for Ti375C529
************START OF SYSTEM INITIALIZATION************
Checking CR information now !
RTC CR1 readback: 00000002
RTC CR2 readback: 00000000
RTC CR3 readback: 00000008
Enable battery switch-over!
Enable battery low detection function!
Checking battery information now !
Battery status (LOW/OK): OK
Battery switch-over: ENABLED
Battery low detection: ENABLED
Checking completed !
*************END OF SYSTEM INITIALIZATION*************
************Rtc Demo Main Menu***************
Please key in the selection and press enter:
1: Check Time 2: Check Alarm 3: Configure Time
4: Set Alarm 5: Disable/Reset Alarm
Welcome to RTC Demo for Ti375C529
************START OF SYSTEM INITIALIZATION************
Checking CR information now !
RTC CR1 readback: 00000002
RTC CR2 readback: 00000000
RTC CR3 readback: 00000008
Enable battery switch-over!
Enable battery low detection function!
Checking battery information now !
Battery status (LOW/OK): OK
Battery switch-over: ENABLED
Battery low detection: ENABLED
Checking completed !
*************END OF SYSTEM INITIALIZATION*************
************Rtc Demo Main Menu***************
Please key in the selection and press enter:
1: Check Time 2: Check Alarm 3: Configure Time
4: Set Alarm 5: Disable/Reset Alarm
6: Change TimeSystem (12/24hrs)
7: Change Battery mode
8: Check Battery information
9: Soft Reset on RTC module
*****************************************
Showing current time now...
2/5/2024
Thursday,2nd May 2024
Current Time: 14:29:44