Enable the Internal Reconfiguration Interface

You enable the interface in the Interface Designer.

To enable internal reconfiguration:
  1. Click Device Setting > Configuration.
  2. In the Block Editor, turn on Enable Internal Reconfiguration Interface.
  3. In the Block Editor Remote Update tab, turn on Enable Internal Reconfiguration Interface. For some FPGAs, you can specify the number of retries in the Efinity software (v2024.1 and higher) by choosing a value in the Interface Designer > Configuration > Remote Update tab > Remote Update Retries box. Otherwise, the default number of retries is six.
  4. Indicate the name of the clock pin that will control the internal reconfiguration.
  5. Define the FPGA pins that the interface uses.
  6. Save.