Revision History
| Date | Document Version | IP Version | Description |
|---|---|---|---|
| November 2024 | 2.2 | 6.3 | Added new sub-topic Known Issues under Customizing topic,
Scatter-Gather with Custom Descriptor List Interface under
Scatter-Gather, and Table 7 in Ports. (DOC-2187) Updated Features, Resource Utilization and
Performance, DMA Operation, Channel Circular Buffer Mode, Example
Design, Customizing the DMA Controller, and
Testbench. Updated Topaz in device
Support. (DOC-2178) Added IP Version in Revision History.
(DOC-2185) |
| June 2024 | 2.1 | – | Updated Resource Utilization and Performance. Added important
note in Example Design and Testbench regarding using default
parameters options only. (DOC-1781) Corrected default
parameter settings. Updated table Example Design Parameter Settings.
(DOC-1787) Updated figure for Connect the UART Module to
PMOD Header J15. Swap pin 1 and 7 for TX and RX.
(DOC-1862) |
| January 2024 | 2.0 | – | Added Buffer Size Settings section. (DOC-1570 and DOC-1629) |
| November 2023 | 1.9 | – | Corrected DMASG_CHANNEL_INPUT_CONFIG Address Mapping. (DOC-1534) |
| September 2023 | 1.8 | – | Updated DMASG_CHANNEL_PROGRESS_BYTES, DMASG_CHANNEL_INPUT_CONFIG and
DMASG_CHANNEL_OUTPUT_CONFIG description. (DOC-1442) Updated example
design configuration. |
| June 2023 | 1.7 | – |
Added Device Support and release notes sections. (DOC-1234)
Added 512 support for Memory Interface External Width.
|
| March 2023 | 1.6 | – | Improved register address mapping and register control examples.
(DOC-1167) Updated IP Manager parameters. Added
information about setting up USB-to-UART module and RISC-V required
prerequisites. Updated testbench output
message. Added SG mode linked-list descriptor
examples. |
| February 2023 | 1.5 | – | Added note about the resource and performance values in the resource and utilization table are for guidance only. |
| December 2022 | 1.4 | – | Added New in Version topic. |
| January 2022 | 1.3 | – | Updated resource utilization table. (DOC-700) |
| December 2021 | 1.2 | – | Added io_[n]_descriptorUpdate port. Updated the DMA
Controller core IP Manager parameters. |
| October 2021 | 1.1 | – | Added note about open-source Java 64-bit runtime environment is
required for generating the DMA Controller core in the IP
Manager. Added note to state that the fMAX in
Resource Utilization and Performance, and Example Design
Implementation tables were based on default parameter
settings. Updated design example target board to
production Titanium Ti60 F225 Development Board and updated
Resource Utilization and Performance, and Example Design
Implementation tables. (DOC-553) |
| June 2021 | 1.0 | – | Initial release. |