Set Up the Tera Term Software

About this task

Procedure

  1. Run the Tera Term software.
  2. In the Tera Term: New Connection dialog box, choose Serial.
  3. Specify these serial port settings:
    OptionSetting
    Speed
    With default parameter settings: 115200
    With Fixed Baud Rate disabled: Set according to the board's DIP switch settings.
    Data 8 bit
    Parity none
    Stop bits 1 bit
    Flow control none
  4. Click OK.
  5. Choose Setup > Terminal.
  6. Under New-line, set Receive and Transmit to LF.
  7. Turn on Local echo.
  8. Click OK.