Command Packet Data Types
The following table describes the supported command packet data types. The command packets are sent through the command register. In LP mode, the command packets are sent through lane 0. Use the command to send non-video packets to the DSI RX Controller.
| Type | Data Type | Packet Size | Transfer Mode |
|---|---|---|---|
| 0x2 | Color mode off command | Short | LP/HS |
| 0x12 | Color mode on command | Short | LP/HS |
| 0x22 | Shutdown peripheral command | Short | LP/HS |
| 0x32 | Turn on peripheral command | Short | LP/HS |
| 0x3 | Generic short write, no parameters | Short | LP/HS |
| 0x13 | Generic short write, 1 parameters | Short | LP/HS |
| 0x23 | Generic short write, 2 parameters | Short | LP/HS |
| 0x4 | Generic short read, no parameters | Short | LP/HS |
| 0x14 | Generic short read, 1 parameters | Short | LP/HS |
| 0x24 | Generic short read, 2 parameters | Short | LP/HS |
| 0x5 | DCS short write, no parameters | Short | LP/HS |
| 0x15 | DCS short write, 1 parameters | Short | LP/HS |
| 0x6 | DCS read | Short | LP/HS |
| 0x37 | Set Max Return packet size | Short | LP/HS |
| 0x29 | Generic Long write | Long | LP/HS |
| 0x39 | DCS long write | Long | LP/HS |