Revision History
| Date | Document Version | IP Version | Description |
|---|---|---|---|
| February 2026 | 3.1 | 5.15 | Updated HACT in table Video Timing Parameters Definition. (DOC-2928) |
| May 2025 | 3.0 | 5.14 | Updated Reset Sequence and Initialization. (DOC-2485) Update
default parameter value. (SIP-910) Example design I/O bank
update (HVIO 3.3 V). (SIP-907) Added description on debug port
for ready_to_xmit and init_skewcal_done in table Debug
Interface. Updated Customizing the MIPI DSI TX
Controller. |
| December 2024 | 2.9 | 5.12 | Updated mapping in Table 1 and Table 6. (DOC-2277) |
| December 2024 | 2.8 | 5.12 | Added debug ports for internal signal observation and monitoring in
Ports and Customizing the MIPI DSI TX Controller. (SIP-580) Added
Pack Type 60 parameter from MIPI DSI TX Controller Core Parameter
table. (SIP-803) |
| November 2024 | 2.7 | 5.11 | Updated Table 3. (DOC-2109) Added Topaz in Features and Device Support.
(DOC-2102) Added IP Version in Revision History.
(DOC-2185) |
| September 2024 | 2.6 | – |
Updated pixel_data[63:0] in Figure 1.
|
| June 2024 | 2.5 | – | Updated notes for lp_cmd_in_progress and hs_cmd_in_progress in table
0x24 Status Register Definition. (DOC-1949) Added Reset Sequence
and Initialization sub-section. |
| April 2024 | 2.4 | – | Updated figure 1.5 Gbps DSI TX Clocking Example by changing 700 MHz to 750 MHz from PLL to MIPI. |
| March 2024 | 2.3 | – | Added important note in Testbench regarding using default parameters
options only. (DOC-1781) Added testbench file for Aldec simulation
model support. (DOC-1782) |
| January 2024 | 2.2 | – | Updated video data at sections: Video Mode Pixel Encoding and MIPI
Video Data DATA[63:0] Formats. (DOC-1624) Updated HS mode data width
in Features section. (DOC-1675) |
| June 2023 | 2.1 | – | Added MIPI Video Data Formats. (DOC-1233) Added Device Support
and release notes sections. (DOC-1234) Updated supported
data rate. (DOC-1217) Updated FIFO Pixel Depth Size
parameter. Editorial changes. |
| April 2023 | 2.0 | – | Updated MIPI Parallel Clock frequency parameter options and default value. (DOC-1186) |
| February 2023 | 1.9 | – | Added note about the resource and performance values in the resource
and utilization table are for guidance only. Corrected
Titanium MIPI Utility-v<version>.xlsm
file name. |
| January 2023 | 1.8 | – | Corrected DATARATE_MPBS typo in Pixel Clock Calculation
topic. Corrected Video Timing Waveform
(Horizontal). |
| December 2022 | 1.7 | – | Updated block diagram and added timing parameter waveforms. (DOC-1023) |
| August 2022 | 1.6 | – |
Added description to port tables about the clock domain used.
(DOC-819)
Corrected Control Status Registers definition.
Corrected hsync and vsync video interface description.
(DOC-879)
|
| April 2022 | 1.5 | – | Added minimum number of line for VSA, VBP, VFP, and VACT. (DOC-790) |
| March 2022 | 1.4 | – | Updated description to HS and LP command queue register. (SIP-170) |
| January 2022 | 1.3 | – | Updated resource utilization table. (DOC-700) |
| December 2021 | 1.2 | – | Updated and added new IP Manager parameters. Update porch file to
Titanium MIPI Utility. Updated register
definition. Updated core block diagram. Added
simulation testbench. |
| October 2021 | 1.1 | – | Added note to state that the fMAX in Resource Utilization
and Performance, and Example Design Implementation tables were based on
default parameter settings. Updated design example target board to
production Titanium Ti60 F225 Development Board and updated
Resource Utilization and Performance, and Example Design
Implementation tables. (DOC-553) Updated the display panel
used in example design. Added 1 and 2 lanes
support. Updated the MIPI TX I/O interface ports, Control
Status Registers definition, Video Mode Configuration table, Video
Mode Pixel Encoding table, and MIPI DSI TX Controller Core
Parameters. |
| July 2021 | 1.0 | – | Initial release. |