Tz50 JTAG Mode

Table 1. JTAG Mode Timing
Symbol	Parameter	Min	Typ	Max	Units
f_TCK	TCK frequency.	–	–	10	MHz
f_TCK	TCK frequency (1.8 V).	–	–	3	MHz
t_TDISU	TDI setup time.^¹	15	–	–	ns
t_TDIH	TDI hold time.^¹	2.5	–	–	ns
t_TMSSU	TMS setup time.^¹	15	–	–	ns
t_TMSH	TMS hold time.^¹	2.5	–	–	ns
t_TCKTDO	TCK falling edge to TDO output.^¹	–	–	30	ns
t_DMIN	Minimum time between deassertion of CRESET_N to the start of JTAG configuration.	32	–	–	μs

Important: The SPI bus must be inactive during JTAG configuration.

The EXT_CONFIG_CLK pin must be inactive during JTAG configuration.

¹ Applicable for all voltage ranges.