T13 JTAG

The SPI bus must be inactive during JTAG configuration.

Important: Refer to T13 Power Up Sequence for power-up details.

Table 1. JTAG Mode Timing Parameters

Symbol	Parameter	Min	Typ	Max	Units
fTCK	TCK frequency.	–	–	25	MHz
tTDISU	TDI setup time.	3.5	–	–	ns
tTDIH	TDI hold time.	1	–	–	ns
tTMSSU	TMS setup time.	3	–	–	ns
tTMSH	TMS hold time.	1	–	–	ns
tTCKTDO	TCK falling edge to TDO output.	–	–	10.51	ns
tDMIN	Minimum time between deassertion of CRESET_N to first valid configuration data.	1.2	–	–	μs

Note: Refer to T13 Power Up Sequence for details on the power-up requirements.