Revision History

Table 1. Revision History
Date Document Version IP Version Description
December 2025 4.1 5.3 Corrected figure Fast Read Waveform to one clock cycle after data_out appears. (DOC-2856)
November 2024 4.0 5.1 Added Topaz in Device Support. (DOC-2176)
Added IP Version in Revision History. (DOC-2185)
June 2023 3.9
Added Device Support and release notes sections. (DOC-1234)
Updated Address Width parameter.
March 2023 3.8 Added support for 4-byte addressing mode and design example targeting Ti180 M484 Development Board. (DOC-1175)
February 2023 3.7 Added note about the resource and performance values in the resource and utilization table are for guidance only.
December 2022 3.6 Added support for 64k block erase and release from power-down state.
Updated design example.
August 2022 3.5 Updated for example design and testbench updates in Efinity v2022.1. (DOC-779)
March 2022 3.4 Corrected the example design page write and quad write data.
January 2022 3.3 Updated resource utilization table. (DOC-700)
December 2021 3.2 Updated ASMI SPI Flash Controller operations waveforms.
October 2021 3.1 Added note to state that the fMAX in Resource Utilization and Performance, and Example Design Implementation tables were based on default parameter settings.
Updated design example target board to production Titanium Ti60 F225 Development Board and updated Resource Utilization and Performance, and Example Design Implementation tables. (DOC-553)
June 2021 3.0 Added note that all .v generated in testbench folder are required for simulation.
Updated resource utilization and performance table.
Updated example design output and implementation table.
Added support for Titanium FPGAs and example design for Titanium Ti60 F225 Development Board.
Added support for quad SPI interface.
December 2020 2.0 Updated core name to ASMI SPI Flash Controller core.
Updated user guide for Efinix® IP Manager which includes added IP Manager topics, updated parameters, and user guide structure.
May 2020 1.1
Added version 1.1 of the core.
Updated the logic utilization and fMAX in resource utilization and performance table.
Removed support for 32-bit addressing.
Updated SCLK_DIV parameter description.
Updated address port description.
Updated example design flow.
Updated the logic utilization and fMAX in example design implementation table.
Updated passing simulation results LED display to 10101100.
April 2020 1.0 Initial release.