Revision History
| Date | Document Version | IP Version | Description |
|---|---|---|---|
| June 2025 | 2.0 | Unidirectional – 5.7 Bidirectional – 5.11 |
Add support for trigger escape command. (SIP-953) Added
RxTriggerEsc [3:0] and changed TxTriggerEsc [3:0] to input in PHY
Protocol Interface table. |
| May 2025 | 1.9 | Unidirectional – 5.7 Bidirectional – 5.10 |
Update default parameter value. (SIP-910) Example Design IO bank
update (HVIO 3.3V) (SIP-907) Updated Customizing the MIPI
D-PHY RX Controller. |
| March 2025 | 1.8 | Unidirectional – 5.6 Bidirectional – 5.9 |
Remove unsupported dynamic delay control feature. (SIP-841) |
| November 2024 | 1.7 | 5.8 | Added Topaz in Features and Device Support. (DOC-2102) Added IP
Version in Revision History. (DOC-2185) |
| September 2024 | 1.6 | – | Added 8 lanes support in Features and Table 1. (SIP-677) |
| June 2024 | 1.5 | – | Revised supported lane number. Removed 8 lane in Features and table
MIPI D-PHY RX Controller Core Parameter. (SIP-578) Added important
note in Example Design and Testbench regarding using default
parameters options only. (DOC-1781) |
| June 2023 | 1.4 | – |
Added Device Support and release notes sections. (DOC-1234)
Updated supported data rate. (DOC-1217)
Updated HS BYTECLK and CLOCK_FREQ_MHZ parameter.
Editorial changes.
|
| February 2023 | 1.3 | – | Added note about the resource and performance values in the resource and utilization table are for guidance only. |
| January 2022 | 1.2 | – | Updated resource utilization table. (DOC-700) |
| October 2021 | 1.1 | – | Added note to state that the fMAX in Resource Utilization
and Performance, and Example Design Implementation tables were based on
default parameter settings. Updated design example target board to
production Titanium Ti60 F225 Development Board and updated
Resource Utilization and Performance, and Example Design
Implementation tables. (DOC-553) |
| June 2021 | 1.0 | – | Initial release. |