T120 Features

  • High-density, low-power Quantum® architecture
  • Built on SMIC 40 nm process
  • FPGA interface blocks
    • GPIO
    • PLL
    • LVDS 800 Mbps per lane with up to 52 TX pairs and 52 RX pairs
    • MIPI DPHY with CSI-2 controller hard IP, 1.5 Gbps per lane
    • DDR3, DDR3L, LPDDR3, LPDDR2 x32 PHY (supporting x16 or x32 DQ widths) with memory controller hard IP, up to 1066 Mbps
  • Programmable high-performance I/O
    • Supports 1.8, 2.5, and 3.3 V single-ended I/O standards and interfaces
  • Flexible on-chip clocking
    • 16 low-skew global clock signals can be driven from off-chip external clock signals or PLL synthesized clock signals
    • PLL support
  • Flexible device configuration
    • Standard SPI interface (active, passive, and daisy chain)
    • JTAG interface
  • Fully supported by the Efinity® software, an RTL-to-bitstream compiler
Table 1. T120 FPGA Resources
LEs1 Global Clock Networks Global Control Networks Embedded Memory (kbits) Embedded Memory Blocks (5 Kbits) Embedded Multipliers
112,128 Up to 16 Up to 16 5,407 1,056 320
Table 2. T120 Package-Dependent Resources
Resource F324 F484 F576
Available GPIO2 130 256 278
Global clocks from GPIO pins 5 16 14
Global controls from GPIO pins 5 16 14
PLLs 7 8 8
LVDS 20 TX pairs
26 RX pairs
 40 TX pairs
40 RX pairs
 52 TX pairs
52 RX pairs
MIPI DPHY with CSI-2 controller
(4 data lanes, 1 clock lane)
 2 TX blocks
2 RX blocks
– 3 TX blocks
3 RX blocks
DDR3, DDR3L, LPDDR3, LPDDR2 PHY with memory controller 1 block (x16 DQ widths) 1 block (x16 or x32 DQ widths) 1 block (x16 or x32 DQ widths)
Notice: Refer to the Trion Packaging User Guide for the package outlines and markings.
1 Logic capacity in equivalent LE counts.
2 The LVDS I/O pins are dual-purpose. The full number of GPIO are available when all LVDS I/O pins are in GPIO mode. GPIO and LVDS as GPIO supports different features. See Table 2.