Customizing the Data Pipeline

The core has parameters so you can customize its function. You set the parameters in the General tab of the core's IP Configuration window.

Table 1. Data Pipeline Core Parameters (General Tab)
Parameter	Options	Description
Enable High-Bandwidth and High-Performance Pipeline (HBP)	Yes, No	Yes: High-bandwidth and high-performance pipeline with registered ready back pressure. No: Design falls back to normal implementation without the ready signal in the pipeline. Maximum area saving still applies for as long as no timing closure problem emerges.
Data_Width	User defined	Data width.
Location of Multiplexer Logic (MUX_IN)	Input, Output	The multiplexer introduces additional cell delay to the data path. Users can choose to move the multiplexer to the input or output side, depending on the critical path location.