Get Started with the
Titanium Ti180 M484 Development Kit

The Titanium Ti180 M484 Development Kit has everything you need to develop and prototype designs for the Ti180 FPGA. This kit showcases the Ti180’s hardened MIPI D-PHY, supporting up to 2.5 Gbps per lane, and hardened LPDDR4x controllers. Learn more about Titanium FPGAs

Use the Raspberry Pi V2 camera to stream video and store data in the development board’s 256-MBit, 1.6 Gbps LPDDR4 or 2.0 Gbps LPDDR4x SDRAM. Two IMX477 camera connector daughter cards let you process video data from 12.3 megapixel IMX477 camera modules (not included). The development board also has two Macronix high-performance 256 Mb SPI NOR flash chips so you can store additional user data such as RISC-V software. The kit also includes Ethernet and HDMI connector daughter cards so you can process data in the FPGA and send it to a display or another system. Learn more about Titanium FPGAs

With the development kit, you get a license for the Efinity® software with 1 year of upgrades. The Efinity software provides a complete tool flow from RTL design to bitstream generation, including synthesis, place-and-route, debugging, and timing analysis.

Features

  • Efinix Ti180M484I3 FPGA in a 484-ball FineLine BGA package
  • LPDDR4 or LPDDR4x 256 Mbit x16 bits memory:
    • Up to 2.0 Gbps double-data rate (LPDDR4x)
    • Up to 1.6 Gbps double-data rate (LPDDR4)
  • Two 256 Mbit SPI NOR flash memories
  • Four MIPI, LVDS, and GPIO high-speed QSE connectors to attach the daughter cards
    included in the kit or your own custom daughter cards
  • Micro-SD card slot
  • FPGA mezzanine card (FMC) with low pin-count connector (LPC)
  • USB Type-C connector to configure the development board
  • 33.33, 50, and 74.25 MHz oscillators for Ti180 PLL input
  • User LEDs and switches:
    • 6 LEDs
    • 2 pushbutton switches
  • Power:
    • 12.0 V power supply connector
    • On-board regulator sources: 0.62 V, 0.85 V, 0.95 V, 1.1 V, 1.2 V, 1.8 V, 3.3 V, 5.0 V
    • Power good and Ti180 configuration done LEDs

What's in the Box

  • Titanium Ti180 M484 Development Board
  • 1 Raspberry Pi v2 camera module
  • 1 Dual Raspberry Pi Camera Connector Daughter Card
  • 2 IMX477 Camera Connector Daughter Cards
  • 1 FMC-to-QSE Adapter Card
  • 1 HDMI Connector Daughter Card
  • 1 Ethernet Connector Daughter Card
  • 1 MIPI and LVDS Expansion Daughter Card
  • 1 15-pin flat cable
  • 2 22-pin flat cables
  • 1 USB type-C cable
  • 12 V, 5 A universal power adapter
  • Heat sink
  • 14 standoffs, 10 screws, and 14 nuts

Buy Now

DigiKey

Find Distributor

Titanium Ti180 M484 Development Board

Titanium Ti180 M484 Board

Titanium Ti180 M484 Board Block Diagram

Titanium Ti180 M484 board block diagram

Titanium Ti180 M484 Development Kit Contents

Titanium Ti180 M484 Development Kit Contents

Titanium Ti180 M484 Development Kit Demonstration Tutorial Video

In Efinix Titanium Ti180 M484 Development Kit tutorial video you will learn about what is included in the development kit, the functions in the Ti180 M484 Development Board design and the demo of the pre-loaded design highlighting multi-input video streaming and reading the SD card information.

Resources

Example Designs