Ethernet XGMII Control Register Tab
In this tab you specify control settings.
| Parameter | Choices | Notes |
|---|---|---|
| Enable Forward Error Correction (FEC) | On, off | Default: off. Turn on to enable FEC. |
| Enable Auto Negotiation (AN) Clause 37 | On, off | Default: on. Turns on auto negotiation. |
| Invert RX Polarity | On, off | Default: off. Turn on to invert the polarity of the RX. |
| Invert TX Polarity | On, off | Default: off. Turn on to invert the polarity of the TX. |
| Speed | 5GHz, 10GHz | Default: 10 GHz. |
| USXGMII AN Ordered set code | 0x0 - 0xff | Default: 0x3. Define the ordered set that has the auto-negotiation information. |